Guides

Set up XFX properly.

The software runs on a second PC. The game PC only has the DMA card in a PCIe slot. Nothing from XFX is injected into the game.

01
Two PCs
Game PC runs the game. Radar PC runs the loader. They share the DMA card over PCIe, or an RDMA link if that is the card you own. A normal single-PC install will not see game memory.
02
Sign in
Use the same account as this site. The license locks to that PC the first time the loader starts. There is no key to paste.
03
Pick the product
The loader only lists products with an active license. Launch from there. The menu key is F2 unless a guide below says otherwise.
04
Aim device
KMBox Net, KMBox B, MAKCU and Ferrum are detected on their own. Plug the device in, leave Auto-Connect on, and the overlay binds the first board that answers.
Products

What each product is.

H1Z1 / ROTK / ZEMU
One build, three clients. Aim with per-weapon speed and drop, ESP, vehicles, loot, and the web radar on the dashboard. Detailed page: H1Z1 DMA guide.
Roblox DMA
Aim, silent aim, ESP, radar and Lua. The menu is the same shell as the other products. Silent aim only applies on a real click.
Dead by Daylight
Survivor and killer ESP, generators with progress, skill checks, and the survivor list. There is no aimbot on this product.
Sea of Thieves
Ships, shipwrecks, world events, loot and barrels. Positions come from the live world, not a guessed actor list. Cannon lead uses the cannon's own projectile speed.
Halloween: The Game
ESP for that game only. It does not include radar, silent aim or movement mods. Guide: Halloween DMA guide.
Web radar
Open the dashboard and choose Radar. It is not in the top bar. The overlay publishes positions about twice a second, so a slow DMA card is not asked to draw the map itself.
DMA link

FPGA, MITM and RDMA.

You do not pick a firmware mode in the menu. The files sitting next to the exe decide the link.

Stock FPGA

Leave vmm.dll, leechcore.dll and FTD3XX.dll where the loader put them. The overlay opens the card as fpga and keeps the first handle that answers. It does not reopen the card to flip algorithms, which is what drops a HITM firmware.

MITM firmware

MITM builds ship their own leechcore.dll (and sometimes vmm.dll and FTD3XX.dll). Put that set in a folder named mitm next to the exe. The overlay loads that copy automatically. The loader does not replace files inside mitm, and it also leaves a leechcore.dll you already replaced in the main folder alone.

RDMA

Put rdma.txt or rdma.ini next to the exe. One IP per line, or ip=192.168.1.10. A full device string such as RAWUDP://ip=192.168.1.10 is also accepted. If that file exists, the overlay tries the RDMA link before the USB FPGA. No settings toggle.

Aim hardware

KMBox, MAKCU and Ferrum.

What gets detected

On startup the overlay looks for KMBox Net on the LAN (the usual 192.168.2.188 and the .188 address of your own subnet, ports 16824 and 16896). Serial boards are classified by USB id: CH340 is KMBox B, CH343 is MAKCU, CP210x and Espressif bridges are Ferrum. Each port is asked km.version(). MAKCU then steps up to 4 Mbaud. Ferrum steps up to 3 Mbaud. A controller passed through the MAKCU controller firmware still uses that same command channel, so aim, magnet and trigger all send through it.

It did not connect

Leave Auto-Connect on. The overlay keeps trying for about twenty minutes. A stale KMBox Net address no longer blocks the COM port. If two serial devices are plugged in, the one that answers the km protocol wins. Close any other tool that already has the COM port open.

Aim feels the same at every smooth value

KMBox Net and KMBox B packets are small. MAKCU and Ferrum take a full move. Smoothness is 1 (fast) through 100 (slow) on all of them. Per-weapon profiles override the global FOV and smooth when that weapon is in hand.

If something fails

Common issues.

License key invalid

Keys look like XFX-XXXXXX-XXXXXX-XXXXXX-XXXXXX. Letter case does not matter. If the site says the key is already used, an admin can move it onto your account.

Loader stuck on checking for updates

That call is HTTPS to xfx.systems. A VPN, DNS filter or firewall is the usual cause. Try another network. The loader will not start the product until that check returns.

License locked to another PC

Open a ticket in Discord. An admin clears the lock. This is what happens after a new motherboard, a new Windows install, or moving the loader to a different machine.

Overlay opens and the player list stays empty

The DMA link did not attach. Confirm the card enumerates, the game is in a match rather than a menu, and you fully quit the overlay including the tray icon before launching a new build. A MITM leechcore.dll left in the main folder is kept. A set inside mitm\ is preferred over the stock DLLs.

Visuals stutter on a slow card

The actor pass is one scatter, not a read per player. Raising the ESP refresh floor in Settings hands time back to the card. The web radar does not add reads. It reuses the snapshot the ESP already has.